SW North America, CNC Machines and Automation

Share

Waves of volatility have wracked the manufacturing supply chain for the better part of two years now. While improving, supply chain disruptions still present challenges to our industry. In this article, I examine three major industries to see which supply chain problems they share and to consider a solution.

Aerospace. Commercial airlines were among the first to truly be dealt a blow by the pandemic, but fortunately the way most airlines plan out production needs years in advance buffers against supply chain unpredictability. However well insulated the industry is, supply chain issues are still expected to impact it. The Russia-Ukraine conflict is affecting air travel, oil prices and material delivery at the same time it spurs many countries’ defense sectors to order more aircraft production. Additionally, Ukraine and Russia are both among the top producers of titanium, a critical manufacturing material.

Automotive. As opposed to the aerospace industry, many automotive manufacturers are still straining to meet demand. Even major manufacturers like Toyota, which had ordered huge advance batches of microchips, still struggled to deal with the supply chain issues the microchip shortage and the Suez Canal blockage caused. These days it is not unheard of for a customer to be promised microchip installation after purchase.

Manufacturers that have all the components to produce a full suite of automotive parts are now focusing on reducing cycle time to get cars on the road as fast as possible. General Motors is approaching this by dropping luxury features such as heated seats to focus on the quick production of functional cars.

The Russia-Ukraine conflict is affecting air travel, oil prices and material delivery at the same time it spurs many countries’ defense sectors to order more aircraft production. Photo Credit: Getty Images

Medical. The medical industry has been hit on all sides by the pandemic and the subsequent supply chain failures. According to health care logistics firm Owens & Minor, 45% of medical supplies are in some way supply constrained. The biggest contributors to the medical manufacturing industry’s strain are the lockdowns in China, congested ports and lack of manpower to transport products over land.

Several common stressors become apparent here, including growing geopolitical constraints, some remaining backlogged ports, a shortage of truck drivers and increased cost of transportation due to elevated oil prices. Savvy parts customers will be looking to find more local manufacturers, and those local shops must be ready. Any machine shop, no matter its size, can be successful securing these jobs if they focus on the following:

  • Matching (or exceeding) the quality and capabilities of large manufacturers. Fortunately for small shops, advanced manufacturing units are becoming more and more accessible. When bringing in these powerful machines, though, it is imperative to have solid software systems that will pair with the machining centers seamlessly. Shops should look for proven CAD/CAM systems with developers that provide their own postprocessors.
  • Improving efficiency at all levels. Prolonged delivery time remains a top concern for companies of all types. That is why finding every opportunity to streamline workflow and boost production speed in the shop is imperative. Common sticking points are lengthy modeling processes, inefficient machining tool paths and inaccurate simulation. A quality CAD/CAM system and simulation software will address these issues.
  • Getting the most out of their operator hours. As a large number of the workforce moves out of shops and into retirement, the skilled labor shortage continues to worsen. Setting up and refixturing parts multiple times is a waste of time for experienced employees. Smaller shops should investigate bringing in multi-axis machining, which is becoming more and more financially viable for operations of any size. Multi-axis machining gives shops the ability to take on jobs with tight tolerances and complex geometries because the multi-axis unit’s cutting tool is so much more maneuverable. Jobs that could have taken half a dozen or more setups — and hours of an employee’s time — can be machined in just one setup with multi-axis.

While 2022’s supply chain problems have been a headache, they may bring some good with them: the “in-shoring” of more jobs and the revitalization of local economies.

Mastercam/CNC Software Inc.mastercam.com

About the Author

Sandy Moffat

Photo Credit: Mastercam/CNC Software Inc.

Sandy Moffat

With more than 35 years’ experience in the CAD/CAM software industry, Moffat is responsible for sales, marketing, partnerships, education and applications engineering for Mastercam CAD/CAM software.

SW North America, CNC Machines and Automation
Star swiss-type automatic lathes
Efficient, Durability, Advanced CBN Abrasives
Kyocera
SPC Innovations, In-machine gaging and attachments
PMTS 2025 Register Now!
World Machine Tool Survey
SolidCAM

Related Content

Aerospace

The Value of Mass Finishing, Shot Blasting for Aerospace and Medical Applications

The choice between mass finishing and shot blasting for CNC-machined parts depends on the specific requirements of the application.

Read More
Aerospace

JR Machine Launches Expansion Strategy, Hires New CEO

An investment from Schneider Resources Holding positions JR Machine to grow in emerging markets such space exploration and green energy.

Read More
Aerospace

What’s Ahead for the U.S. Metalworking Economy?

Although previously robust, the U.S. metalworking economy has softened in recent months. However, the overall outlook remains strong. Even a possible 2023 recession does not appear to be an obstacle to continued growth over the next few years.

Read More
Aerospace

A Small CNC Machine Shop’s Journey to CMMC

Achieving Cybersecurity Maturity Model Certification (CMMC) —  soon to be required to do work for the U.S. government — takes time and money. This 10-person shop takes us through some of the challenges it has faced and lessons it has learned on its CMMC voyage.

Read More

Read Next

A Tooling Workshop Worth a Visit

Marubeni Citizen-Cincom’s tooling and accessory workshop offers a chance to learn more about ancillary devices that can boost machining efficiency and capability.

Read More
Measurement

Seeing Automated Workpiece Measurement in Real Time

User-friendly inspection software for CNC machining centers was shown at IMTS 2024 monitoring measurements between and after machining while performing SPC based on recorded measurement values.

Read More
PMPA

Do You Have Single Points of Failure?

Plans need to be in place before a catastrophic event occurs.

Read More
SW North America, CNC Machines and Automation