ViciVision Prima Simplifies Optical Measurement for Turned Parts
The company says it reduces programming learning time by 30%.
ViciVision’s Prima optical measurement series for turned parts is designed to transform part measurement by providing a more objective measurement system. Photo Credit: ViciVision
ViciVision’s Prima optical measurement series for turned parts is designed to simplify measurement. The company says it reduces programming learning time by 30%. It is also designed to transform part measurement by providing a more objective measurement system. The Prima optical measuring machines can streamline the process by simplifying steps, with no need for an operator manual. It features “Vivian,” a programming assistant to guide users step by step through the measurement process.
ViciVision also designs, manufactures and distributes a variety of other optical measuring machines for turned and ground parts. With these noncontact instruments, it is possible to take many measurements in a matter of seconds, such as static, geometric, thread, form or nut measurements.
The ViciVision M Series is designed for subcontracting and general turning. The M1 models are well suited to measure flank multi-spindle lathes or sliding head lathes, while M2 and M3 models work with small components to 900 × 140 mm.
The X series is specific for micromechanical components, watch parts and dental and biomedical screws.
The Techno series is designed for the automotive industry, including camshafts, turbines, constant velocity joints, transmission shafts, valves, pistons, crankshafts and more. It is a modular range that enables users to choose the most suitable measuring range between 20 different possibilities, starting with 300 × 40 mm up to 1,250 × 180 mm.
Related Content
-
Precision Machining Technology Review: December 2023
Production Machining’s December 2023 technology showcase includes some of the latest technology from Sandvik Coromant, Nikon Metrology, The L.S. Starrett Co., Walter USA, Kennametal and SolidCAM.
-
Does a Scanning Probe Make Sense on a Swiss-Type?
Swiss-types have limited tooling capacity, but there can be advantages to giving up some of that capacity to take advantage of a touch probe — in fact, a scanning probe — to enable in-process part measurements.
-
The Value of CMM Controller Retrofits
In this case, new controllers for two coordinate measuring machines — one 26 years old — with new programming software offers the possibility to enable multisensor inspection of critical, turned aerospace components.