Single & Multi-Spindles
New Swiss Turning Technology Boosts Productivity For Contract Manufacturer
Technically, this control is not a CNC, but a PNC (parallel numerical control), and that is the difference. The PNC control was developed using a FANUC system that allows each machine axis to be governed by its own chip, which carries the part program.
Read More
So, You Need To Automate Your Multispindle...
You can't decide if you need an integrated loader or a stock reel loader. You've boiled it down to a space versus cost decision. Now what do you do? You basically have two choices: the stock reel loader or an integrated loader.
Read MoreLinear Motors On Multis
A primary objective for multi-spindle screw machines, or any metalcutting machine tool, is to accurately and rapidly deliver a cutting tool to a workpiece while precisely controlling its cutting action.
Read MoreEvolving From Cam Multi-Spindles To CNC
There are thousands of cam-driven multi-spindles out in the field producing millions of parts 24 hours a day. And while there may always be a place for these machines when high volumes of relatively loose-tolerance parts are required, the tide is turning. CNC multi-spindles have emerged as a viable alternative now.
Read MoreBoosting Multi-Spindle Productivity
Here's a look at some of the ways Delta Faucet is taking advantage of off-the-shelf technology to improve multi-spindle screw machining productivity.
Read MoreBar Loader Boosts Uptime For Multispindles
This shop prides itself in being the sole supplier to "virtually all" of its customers. It designs a manufacturing process for every job, bringing to bear an array of precision turning equipment.
Read More
Relief For Sloppy Slides
Few screw machine shops can escape the inevitability of tighter tolerance demands from customers. Getting the most accurate tool travel from a screw machine is a key component to consistent part production.
Read More
