-
SPONSORED
-
Tooling
Microbore Collets for High Clamping Force
The powRgrip PG system uses a toolholder and collet to generate a high clamping force while still maintaining a TIR of less than 0. 0001". The company says it takes less than 10 seconds to press in a tool or remove it from the holder.
Read MoreThread Mills, Single Point and Port Tools, and More
The company offers hundreds of new tools among its thread mill, specialty end mill, boring bar, threading tool, grooving tool and port tool product lines. Tools include corner rounding end mills with three flutes, double ended; solid carbide engraving tools in a variety of angles and sizes; and mini-boring bars with diameters ranging from 0. 015" to 0.
Read MoreBar Feeders with Synchronization
The Alpha ST 212 and ST 320 bar feeders provide reliability, stability and ease of operation, the manufacturer says. Model ST 320 feeds round barstock from 0. 12" to 0.
Read MoreAddition to Toolholder Line
Groove n’ Turn toolholders offer a new holder available in 1/2", 5/8", 3/4" and 1" diameters. It has a 1. 250" minimum bore and holds inserts with cutting depths to 0.
Read MoreHigh-Speed Spindles For Swiss Turning
The company has added a 20-mm and 22-mm-diameter model to its Micro line of high-speed spindles for Swiss turning. Right-hand spindles are also available. These spindles eliminate secondary operations for Swiss-type lathes.
Read MoreHone In On A Honing Method For Your Application
Like many metalworking processes, there are several machining methods for honing operations, and knowing which one is best for your particular application is critical for finding efficiency and cost effectiveness for your shop.
Read MoreQuick-Change Systems Save Time And Manpower
In a world where faster production rates mean more profits, shops strive to find the quickest way to meet deadlines without sacrificing quality. One way to do this is to convert to quick-change workholding and tooling systems.
Read MorePigging Out: High Feed Machining Techniques For Small Cutters
Small machining applications—those relying upon tool diameters smaller than 2. 0 mm—are continuing to grow based upon both consumer demand and developing machining technology. It’s apparent that the trend to produce ever-tinier electronic goods will continue (smaller cell phones, minute keyboards, plastic ear buds, and so on); all require small and precise mold insert creation.
Read MoreCommitment To Quality
Increased demands for quality have led tooling manufacturers in a new direction.
Read MoreBest Of Both Worlds
The proven advantages of wiper technology for indexible insert cutting tools continue to evolve. This article looks at some of them.
Read More