Metalworking Fluids
Filtration Systems Ensure a Continuous Clean-Oil Supply
Vomat fine filtration systems filter to NAS 7 (3-5 microns), operate in full-flow mode and separate dirty and clean oil while the system filters and cleans the machine, meaning that the backflush cycle is initiated automatically for each individual filter element.
Read More
1/4 NPT No Drip Atomizing Spray Nozzle Covers 360 Degrees
Exair’s 1/4 NPT No Drip internal mix 360-degree hollow circular pattern atomizing spray nozzle can provide a smooth, even coating on the inside diameter of a pipe or similar ductwork and is also effective for operations where mist over a broad area is needed.
Read More
Sump Cleaner Transport Base Handles Coolant in Large Plants
Cecor’s CB6 Sump Shark sump cleaner transport base can move a sump cleaner through a plant between collection, treatment or disposal, and off the truck an operator can use controls to maneuver the unit into tight spots and next to machine tools.
Read More
Lubrication Coating System Requires Minimal Intervention
Layton Technologies’ lubrication coating system is an ATEX approved design with vapor detection, flame detection, fire protection and suppression system that includes ultrasonic agitation and subsurface jets to agitate the fluid when parts are being processed.
Read More
Fluid Reclamation Machine Restores Metalworking Fluids
Eriez HydroFlow’s SumpDoc portable inline fluid reclamation machine’s design has been updated to be simple to operate and small and lightweight enough to allow an operator to push it quickly and easily from location to location.
Read More
VR8 High Pressure Coolant System Extends Machine Tool Life
MP Systems’ VR8 variable volume high pressure coolant system (HPCS) can extend machine tool life, improve part quality, and reduce cycle time, and is part of a line of HPCSs the company launched in late 2016.
Read More
Filtration Technology Separates Dirty and Clean Oil
Vomat’s full flow filtration technology separates dirty and clean oil and provides cleaned cooling lubricants to NAS 7 (3-5 μm) standards, allowing coolant to remain longer in the system than in conventional filter systems.
Read More
Coolant Systems Offer Alternative to Edge-Type Filtration
Eriez HydroFlow’s Coolant SuperFiltration systems remove particles down to 3-micron nominal from cutting fluid while maintaining a stable fluid temperature and offer an alternative to edge-type filtration in oil applications.
Read More
Therma Quenching Oils Provide Efficient Use
Condat’s Therma range of quenching oils have evolved in order to comply with requirements and regulations related to the use of oils, with the products formulated exclusively from Group III, highly refined base oils ensuring safer and more efficient use.
Read More
Getting the Most from MQL
Here's a broad view of minimum quantity lubrication along with a closer look at using MQL in turning applications.
Read More
