Toolholders
Chip Control
I discovered that chip control actually means controlling chips as they are being cut off of a workpiece.
Read More
Faster Centerline Drilling with Continuous Pecks
One of the most difficult small-part turning operations does not involve a turning tool at all, but instead involves a drill.
Read More
Cutting Tools for Titanium, Aluminum and Composite Aerospace Components
The company offers a range of Cyclo Cut cutting tools and Cyclo Cool metalworking fluids designed and blended for all aspects of aerospace machining.
Read More
Quick Change for Screw Machines
New quick-change dovetail form toolholders bring lean operations at a lean price.
Read More
Technology Hits the Road
As a strategy to assist in its tradeshow follow-up efforts, this company has put a demonstration vehicle on the road to bring its technology to prospective customers.
Read More
Collet Chuck-Style Broach Toolholders
The new collet chuck-style broach toolholders are said to be versatile because they use ER-style collets, which are designed to reduce the three-screw method of centering the HSS broach in the broach toolholder. The ER-style collet will hold virtually any diameter shank broach tool in the holder within the range of the collet. A built-in stop screw allows the operator to adjust for different length broaches and to compensate for different lengths on re-sharpened broaches.
Read More
Modular Tooling System for Multi-Spindle Automatics
A modular tooling system for multi-spindle automatics is available, including the latest models for Davenport machines. Besides being more rigid than dovetail form tools, the modular system allows for much faster tool changes, the company says. This system consists of a modular insert holder assembly and a cross-slide holder assembly, offered in both up-cut and down-cut versions.
Read More
Microbore Collets for High Clamping Force
The powRgrip PG system uses a toolholder and collet to generate a high clamping force while still maintaining a TIR of less than 0. 0001". The company says it takes less than 10 seconds to press in a tool or remove it from the holder.
Read More
Addition to Toolholder Line
Groove n’ Turn toolholders offer a new holder available in 1/2", 5/8", 3/4" and 1" diameters. It has a 1. 250" minimum bore and holds inserts with cutting depths to 0.
Read MoreQuick-Change Systems Save Time And Manpower
In a world where faster production rates mean more profits, shops strive to find the quickest way to meet deadlines without sacrificing quality. One way to do this is to convert to quick-change workholding and tooling systems.
Read More
